How to Properly Jump Start a Car

How to Properly Jump Start a Car
ArticlesBlog


Hey guys Chrisfix Here. Today I’m going to teach you the proper way to jumpstart your car if your battery’s dead. It’s happened to all of us, you leave your headlights on, your battery just drains for some reason, and you need a jump. In my 95 Ford Windstar the battery is dead, Just ’cause it’s seven years old it’s pretty old, batteries last about four years on average. (Engine turning over slowly) As you could hear, it won’t start, so I’m going to show you how to safely and properly jump a car. So the first step Is get a car that runs and pull it up to the car with the dead battery, so the jumper cables could reach both batteries. You want to make sure that both cars are separated and don’t touch each other when you do this. You also want to make sure that you take the keys out of the ignition for both vehicles. For each of our vehicles you want to find the battery and find where the positive and negative leads are. This is my truck battery, this is the battery that works. So here’s the positive, it’s Red, and then here’s the negative, it’s Black. Now if we go over to our van which is not starting, we can look at the battery, And you can see right here, Black cable, that’s our negative, and then this one is our positive, it’s our Red cable. So, once you identify that, we could begin. Now you’re gonna want to take your jumper cables and spread them out, so you have one Red one Black in each hand, and just detangle the wires Here’s the dead battery in our van, and we’ll take out the jumper cables. From this point forward, we don’t want the jumper cable ends to touch each other. The first thing we’re going to do is take the one side of the jumper cables, We’re going to get our Red, which is our Positive, and we’re going to attach it to the positive side of the dead battery. You want to make sure you get a good connection right on that battery post. You can see that these copper pieces are touching the metal on the post, and there’s a good connection. If you want you could wiggle it around a little bit just to make sure you get it in there good. The reason why you touch the Red cable to the dead battery first is because the dead battery doesn’t have as much energy as the good battery, so starting here is the safest. You could take your ground and just put it on a piece of plastic. You don’t want your ground touching any bare metal, ’cause then you’ll be grounding it out. You could just leave it there for now, we’re gonna connect it to the battery in a second. Now we’re gonna go over to the good battery. We’re gonna grab both of our leads just like we did before, don’t touch them together. We’re going to take our Red one and put it on the positive terminal, which is also Red. At the good battery we’re gonna get our black lead, and we’re gonna attach it to our negative side here. So we’ll attach this here. Now we have the Black lead and the Red lead on the good battery attached. Back at the dead battery, this is the last lead we have to attach, but you aren’t going to attach it to the negative battery terminal. Touching the lead to the negative battery terminal will cause a spark, and these sparks can ignite any fumes from the battery, and cause an explosion. Batteries could create hydrogen gas, especially when they’re run down and not working properly, and hydrogen gas Is explosive, so to play it safe, just find another grounding point. Some cars have a ground spot away from the battery specifically for jumping your car, so check your owner’s manual. If not, find a bare piece of metal for a ground, that isn’t a moving part, and that isn’t attached to an electrical component. So when looking for a ground, you want to try to find something that’s bare metal If we look here, there’s a nice ground here, but unfortunately this wire is pretty thin, so if you don’t have a good connection to this ground, this wire is thin, so you could actually melt it. A good spot to look is on the engine. When we’re looking at the engine here, here’s a nice bear piece of metal, my only problem with this bear piece of metal is that it’s right next to the fuel pressure regulator, and we’re trying to avoid sparks next to anything flammable, so this isn’t a spot that I would want to use. But it’s nice because it’s a nice thick piece of metal, it’s bare metal, it’s directly connected to the engine, so you get a good ground. In my case what I’m going to do, is I’m going to go find the Strut tower. And as you can see on my strut tower, there’s a bunch of good bolts that provide a good ground, and they’re also bare metal, so we’re going to attach it to that. The other good thing is, this strut tower’s away from the battery, so we don’t have to worry about sparks. But there’s tons of grounds that you could use, in this case this is just one of them. Just get in here and clamp right down onto that, and make sure you have a good connection. So with our cables all set up one last thing you want to do is you want to inspect to make sure that these cables are not near any cooling fans, you can see our cooling fans are over here, so we don’t have to worry about that, and our serpentine belt is on the other side so we don’t have to worry about that. Now that our cables are clear let’s check out the other side. Moving to the good battery side the fan is right here as well as the serpentine belt, and our cables are out of the way over here, so we’re ready to jump the vehicle. Now we’re gonna start the engine on my truck which is the good battery, and let it run for two minutes. (Truck running) My trucks been running for about two minutes so we’re going to start the engine in my van. Hopefully it’ll start up. (Van starting) There we go. Now right away, You want to go and take off the negative terminal first. And now if I take this off and it sparks, it’s away from the battery which is being charged, and potentially creating hydrogen gas. If we took off the Red terminal first, we could create a spark right here, which is on top of the battery which wouldn’t be good. So we’ll remove the negative terminal first, don’t let this touch anything, and then we’ll remove our positive terminal on the bad battery. Make sure these don’t touch. Then you remove the Red cable, and then the Black cable. And now your car is started so you’re not stranded anymore. So let’s just give a scenario where you go to start your car, and it doesn’t work. It slowly drags, but you don’t get the car started. Let the car sit for another five minutes, Let that other car that’s running charge up your battery. Essentially the alternator in the other car is charging your battery, so, sit for five more minutes, take the key out of the ignition, and then in five minutes try starting it again. If it seems like you’re really close to starting, but you just need a little bit more juice Have that person in the car with the good battery rev up the engine to about 2,000 Rpms, and hold it there as you try to start the vehicle with the dead battery. This will get the alternator spinning faster so you’ll have more power to start the car with the bad battery. After all that if all you get is a click, and you can’t start your engine, your battery could be permanently bad, there could be a bad cell in there, it could be shorted internally, but before you give up, make sure that you have a good connection on both the positive and negative terminals. Make sure you check the connections on the bad battery, as well as the good battery. Another thing to do, is if you attach it to this ground, and it won’t start the car, try connecting it to a better ground. A lot of times switching to another ground will start the car Hopefully this video taught you how to properly jump your car If the video is helpful, remember to give it a thumbs up. Also consider subscribing. The top tip for this video is. What if you’re using one of these portable jumpers? These portable jumpers are great to have in your car, and they’re really easy to use. Plus you don’t have to rely on anybody to be there to help you jump your car you could do it yourself. With one of these jumpers all you have to do is make sure that’s in the off position. Take your red jumper cable, connect it to the positive terminal, and then your black jumper cable could actually connect directly to the battery. There’s no need to connect it to a separate ground like when we did when we jumped the car. Because there’s an on/off switch there’s no electrical current going through these jumpers. If you really wanted to you could touch the two jumpers together and nothing will happen. So when we’re connecting the black lead to the negative terminal, there’s no sparks at all, so we can connect directly to the battery’s negative terminal. Now all we have to do is turn it to the on position, and we’ll go start the car. (Car starting) She started right up, right away just switch this off, and then you can just disconnect both of the jumper cables, and you’re good to go.

100 thoughts on “How to Properly Jump Start a Car

  1. VERY VERY HELPFUL!! My son's friend left his headlights on all night! My husband wasn't home and my two sons and their friends didn't know how to jump start the car so I looked in my van and found the jumper cables and I went on You Tube and punched in how to jump start a car and yours was the first one to come up. It was my first time doing this and I LOVED LOVED how you explained EVERY step and the tips you added were helpful and good to know!! THANK YOU THANK YOU! I HOPE YOU KNOW HOW AWESOME YOU ARE!

  2. What the makers of jump leads should do is supply with the jump leads, a 3ft earth lead with a crocodile clip at one end an a lug on the other.

    The 3ft lead can be clamped to the dead battery ground post first then the lugged end clamped to the ground jump lead away from the engine bay.

    This way you can safely use the dead battery ground and not have to search the engine bay for a point. Especially safer if you're not car savvy.

  3. Just use a jump pack. No need for having to bother complete strangers for a jump. Especially ones who don't trust you doing it without blowing up yourself in the process and their car.

  4. "Batteries last about 4 years on average"……

    Just replaced my 13yr old Panasonic battery on my mx5 nc, it still fired up the car but i think maybe it deserved a rest.

  5. Hey Guys Fris Chix here! Lol I like every one I watch even if I have no reason to watch it… and even if he does have something against motorcycles! Lol jk bro

  6. One dude in the mall parking lot asked if he can borrow my car to jumpstart his. I opened my hood and he started to hook up the cables. Next thing I saw was smoke and sparks coming from under the hood of his BMW. He reversed the cables and fried all his electronics. Lucky he didn't fried my shit.

  7. Instead of revving the engine to 2k rpms just turn on your AC to full blast and turn on all your lights interior/exterior as well as turning on your radio
    I’m training as a technician at UTI and just went through electrical

  8. Thank you for this video, though when I connected the dead black to the grounding it scared the crap out of me because the car alarm sounded. lol.

  9. Shouldn’t have both motors running while connected. That would be both alternators running against each other! Let the donor vehicle run for about 5-10 minutes before attempting to start the dead vehicle. Shut off the donor vehicle before attempting to start the dead vehicle. If not, that could cause damage to electrical systems!

  10. Amazing video tutorial. I followed the directions and literally in 5min i had my dead car, revived. Thank you so much, appreciate the high quality videos ❤

  11. I dont understand why you dont attach the black jumper cable to the the negative/black terminal on the dead battery but have to attach the black cable somewhere else on the engine?

  12. Seems odd to remove negative terminals first. This means that your positive probe will still be charged when you disconnect it.

  13. How to jumpstart a car properly.
    1.put jumper cables on a empty battery.
    2.,connetc positive on your right hand and negative on your left hand.
    3.jump and your car will start!

  14. That little portable charger is nice to have. You won’t need it most of the time and it’ll be deadweight but you’ll really be glad you have it when you’re stranded with no one nearby.

  15. With the STANLEY J5C09 jump starter and power station, you no longer need to dread roadside emergencies when your vehicle won't start. This compact, portable device delivers serious jump-starting power with 1000 peak amps and 500 instant starting amps. That's enough power to jump-start your car, truck, SUV, motorcycle, boat, RV, ATV, or tractor; all without the need to use another vehicle for assistance. Simply connect the clamps to the battery, turn on the switch and start your vehicle. The reverse polarity alarm will alert you when there is an improper connection. A high-powered LED light rotates 270 degrees to help you work in the dark. This jump starter is equipped with a 120 PSI air compressor to help inflate tires with low pressure. The built-in 12V DC outlet and USB port come in handy to charge your phone and electronic devices. It features an integrated charging cube (a 120V charging adapter) that allows the STANLEY J5C09 jump starter to be charged using a standard household extension cord, so you don't need to keep track of a separate specific charging cable.

  16. Thought I could do it myself but I was checking with your video to make sure I did not miss anything. I fought out I was doing some things wrong. Thank you.

  17. I did what he said, didn't work so I did what u said not to do which is connect the black to the dead battery and it then worked

  18. Why can’t I just use + & – on designated spot on cars before I jump? Why do I have to ground the – on the dead battery car

  19. Thank you. Helpful, simple, SAFE, and quick instructions.
    I like that you added the stand alone battery charger, as that is what I was using, except mine plugs into an outlet which is basically the same but you plug it in after hooking it up because there's no on switch.
    I watched this other video and it was like and I was super lost, they kept showing different batteries or something and it just made no sense. I watched it to check and maybe see what was different about using a standalone since I've jumped a car before.

  20. My Honda has been parked outside for a few months and the car-key wouldn’t open the door or do anything. went to different places looking for that damn little battery so changed the car-key battery and still nothing. tried to turn on the engine and noticed car wouldn’t start. obviously needed to jump start the car battery. saw the video and did it all for the FIRST time. that’s Chris 👍🏼👍🏼 btw I do follow you on iG

Leave a Reply

Your email address will not be published. Required fields are marked *